Welding Wisdom for Professionals and Beginners Alike.

The Miller 210 provides Pro-Set values for 6010 and 7018 electrodes. Start with factory settings: 100 PPS, 40% peak amps, and 25% background amps for aluminum welding. Adjust PPS for…

To set the Miller 350P for aluminum welding, use a wire speed of 300 IPM and voltage at 24V. Adjust the arc length and hot start parameters as needed. For…

MIG welding aluminum uses argon as a shielding gas. Argon can be used alone or mixed with helium. It prevents oxidation and ensures a clean weld. For aluminum sheets up…

Mil spec aluminum welding refers to high-quality welding of aluminum alloys for military use. It follows military standards and requires precision. Welders must be certified and understand fusion welding methods,…

The best gas for MIG welding aluminum is 100% argon. Set the flow rate to around 20 cubic feet per hour. Proper shielding gas flow is crucial. Too much gas…

To MIG weld aluminum, use Gas Metal Arc Welding (GMAW) with argon or a helium-argon mix as the shielding gas. Maintain a 10-15 degree torch angle and use a spool…

MIG welding aluminum gasless uses a Teflon liner and soft wire rollers for effective wire feeding. It typically requires pure Argon as a shielding gas. While you can use flux-core…

The best electrodes for TIG welding aluminum are 2% ceriated (green tip) and 2% lanthanated (blue tip). Reliable brands include Blue Demon, Weldcraft, and CK. Avoid 2% thoriated tungsten for…

For TIG welding aluminum, set your gas flow rate to 15-25 cubic feet per hour (CFH). Use a pressure regulator set to 30 psig. Adjust pressure between 20-30 PSI for…