Tariqul

Electric arc welding works by creating an electric arc between a welding electrode and a workpiece. This arc generates a high-temperature flame that melts the metal at the welding joint. As the molten metal cools, it solidifies and forms a strong weld. Knowing this process helps improve welding techniques and achieve better results. There are … Read more

Arc welding is a welding process that joins materials by creating heat through an electric arc. The arc forms between the electrode and the workpiece. This arc generates a luminous discharge in ionized gas, generating high temperatures that melt the metals. Knowing these principles ensures effective and safe welding. The heat generated by the arc … Read more

The proper heat setting for arc welding varies based on factors like amperage, electrode type, and material thickness. Preheat the metal if needed, typically to about 50°F. Always monitor inter-pass temperatures to prevent overheating and cracks in the weld. Ensure you follow correct welding techniques for optimal results. To begin, you should consult the material … Read more

To set up the Thermal Arc for stick welding, press the PROCESS button to select STICK mode. Use the MODE switch to choose AC or DC output. Check that the LED indicators are lit. Follow safety precautions, like removing the electrode when not in use. Refer to the user manual for specific settings and guidance. … Read more

To set the amperage on arc welding equipment: 1. Begin with the recommended range from the electrode manufacturer. 2. Conduct test welds on scrap material using different settings in that range. 3. Adjust the amperage based on your test weld results to achieve the best performance. To set the appropriate amperage, consider the material thickness. … Read more

Seeing three arcs when welding may happen due to lens reflection. An improperly aligned welding lens can refract light, creating multiple images. The intense light and ultraviolet radiation from welding arcs can also impact your visual perception. Always check your lens for proper function to ensure safety and clarity during welding. Safety tips also play … Read more

The Select-Arc 720HP is a flux-cored, gas-shielded electrode for welding carbon steels in all positions. Use shielding gases like CO₂ (100%) or 75-80% Ar/CO₂ mix. Key parameters include a wire diameter of 0.045 in, a tensile strength of 84,000 psi, and adjustable settings for wire feed speed, amperage, and voltage. Next, consider the shielding gas … Read more

Seeing three arcs while welding may result from lens reflections or visual effects. A high-speed camera can capture multiple arcs; this does not indicate a problem. However, issues like arc-eye may occur from ultraviolet radiation. Ensure your protective lens is clean and properly positioned to avoid visual distortion and safeguard your vision. Furthermore, the viewing … Read more

In shielded metal arc welding (SMAW), a common false statement is: “The SMAW process only uses AC polarity.” This is incorrect because SMAW can use both AC and DC polarity, specifically Direct Current Electrode Positive (DCEP). The process also relies on coated consumable electrodes that produce gas for shielding. Additionally, SMAW involves using a consumable … Read more

To ensure electrical safety in arc welding, follow these precautions. Always operate equipment according to safety codes and conduct inspections with the power off. Avoid touching live components during welding. Use appropriate personal protective equipment, like rubber and welding gloves, to prevent electrical shock and burn injuries. Regular inspections of equipment also promote electrical safety. … Read more